Untitled-1.png
Untitled-2.png
Untitled-3.png
Untitled-4.png
Untitled-1.png
Untitled-2.png
Untitled-3.png
Untitled-4.png

UnderHitch Ford F150 Raptor and RaptorR 2021-2025

$329.00

  • FORD F150 Raptor and RaptorR 2021-2025 w/ 2.0” SKU: RAPTORG3-2125-2.0

  • Receiver Size: 2.0 Inches For Both Storage Receiver locations.

  • Under Hitch Location On Vehicle: Left Rear wheel well behind axle. Accessible through wheel well.

  • Maximum Ball Mount Drop Size: 4 Inches (main location).

  • Maximum Ball Mount Length: 14 Inches (main location).

  • Maximum Ball Mount Head Width: 4 Inches (main location).

  • Finish: Satin Black. Media Blasted, Solvent Cleaned, Powder Coat Primer And Powder Coat Finish Coat.

  • Hardware: All Required Hardware Included. Corrosion Resistant.

  • Under Hitch Is Prepped For The Rattle Reducer Clamps Which Are Sold Separately If Desired By Customer.

  • Install Time: 25 Minutes.

Quantity:
Add To Cart

  • FORD F150 Raptor and RaptorR 2021-2025 w/ 2.0” SKU: RAPTORG3-2125-2.0

  • Receiver Size: 2.0 Inches For Both Storage Receiver locations.

  • Under Hitch Location On Vehicle: Left Rear wheel well behind axle. Accessible through wheel well.

  • Maximum Ball Mount Drop Size: 4 Inches (main location).

  • Maximum Ball Mount Length: 14 Inches (main location).

  • Maximum Ball Mount Head Width: 4 Inches (main location).

  • Finish: Satin Black. Media Blasted, Solvent Cleaned, Powder Coat Primer And Powder Coat Finish Coat.

  • Hardware: All Required Hardware Included. Corrosion Resistant.

  • Under Hitch Is Prepped For The Rattle Reducer Clamps Which Are Sold Separately If Desired By Customer.

  • Install Time: 25 Minutes.

Rattle Reducer
Rattle Reducer
$11.99
Size:

  • FORD F150 Raptor and RaptorR 2021-2025 w/ 2.0” SKU: RAPTORG3-2125-2.0

  • Receiver Size: 2.0 Inches For Both Storage Receiver locations.

  • Under Hitch Location On Vehicle: Left Rear wheel well behind axle. Accessible through wheel well.

  • Maximum Ball Mount Drop Size: 4 Inches (main location).

  • Maximum Ball Mount Length: 14 Inches (main location).

  • Maximum Ball Mount Head Width: 4 Inches (main location).

  • Finish: Satin Black. Media Blasted, Solvent Cleaned, Powder Coat Primer And Powder Coat Finish Coat.

  • Hardware: All Required Hardware Included. Corrosion Resistant.

  • Under Hitch Is Prepped For The Rattle Reducer Clamps Which Are Sold Separately If Desired By Customer.

  • Install Time: 25 Minutes.

Check out Underhitch installed